|
|
| Description
|
AUTOMASTER
|
Competitors
products (U.S.A, Japanese, European etc)
|
| Production
Rate
|
1,200 pieces
(for operating 12hrs)
|
745 pieces
(for operating 12 hrs)
|
| Cycle Time
|
36 Seconds
|
58 Seconds
|
| Reject rate
(Quantity)
|
0.08% (1
Piece)
|
16% (119
Pieces)
|
| Mold’s
service life
|
300,000
times
|
200,000
times
|
| Control
method
|
Moveable/Fixed
parts separately (2 zones) * 1 unit
|
Moveable/Fixed
(1 zone) * 2 units
|
| Temperature
deviation
|
±0.1 ~ 0.5°C
|
±3 ~ 28°C
|
| Temperature
management
|
Direct
control of mold temperature
|
Indirect
control of mold temperature
|
| Power
Consumption
|
654KW/Monthly
|
7,790KW/Monthly
|
| Machine’s
Life
|
Approx. 8 years
|
Approx. 3-4
years
|
| Machine’s
Type
|
For low
temperature & high temperature (combined type)
|
Only for
high temperature
|
Note:
* Above data was based on 450 ton an injection-molding
machine when used to make washer’s covers with ABS resin.
* Reduced cycle time and productivity up by 47 %
2. Advantages of using AUTOMASTER
- Reduce cycle time by 30% -
58% and productivity goes up considerably
- Reject rate drops within 0.1%
(Injection molding industry’s average
reject rate: 24%)
- Reduce electricity consumption
considerably.
- Can save capital investment
because an injection-molding machine
and mold are last longer (Approx.
40%).
- Improve products’ quality
and can manufacture many different
products as it required.
- No need to purchase additional
injection-molding machines for other
products
Imitation of appearance may be
possible but never technology…!
In conclusion, AUTOMASTER is
the solution for all your problems.
|
